硅酸铋晶体的蚀像形貌

本文研究了提拉法生长的硅酸铋晶体(BSO)的蚀像形貌,比较了{100},{110},{211},{111}面族的腐蚀像特征和腐蚀速度,并用周期性键链(PBC)的形貌理论分析了腐蚀形貌。通过蚀像形貌特征便可方便地进行晶体定向,准确地确定各族晶面之间的相对位置和极轴的方向等。     

薄膜波导光隔离器和光电子单片集成技术

叙述了Ｂｉ，Ａｌ：ＹＩＧ薄膜的液相外延生长，研究了这种薄膜材料的光吸收系数、法拉第旋转角、磁光优值及生长感生磁各向异性与Ｂｉ含量的关系。在此基础上，连续外延生长了作单模磁光波导的双层Ｂｉ，Ａｌ：ＹＩＣ薄膜。光纤偏振器的使用使薄膜波导光隔离器向实用化迈进了一步，恒磁薄膜作偏磁场为器件集成化作出了贡献。采用ＭＯＣＶＤ技术，在ＧＧＧ（钆镓石榴石）基片上同时外延生长Ⅲ－Ⅴ族半导体薄膜和钇铁石榴石（ＹＩＧ）薄膜，把光隔离器和磁光光源直接集成在一起，是一种非常有前景的光电子集成组件。     

在玻璃衬底上制作K~+离子交换掩埋波导的新工艺

本文报道用不同离子两步交换技术,在玻璃衬底上制作K~+离子交换掩埋波导的新工艺,它不要求施加外电场。用X射线能谱(XES)分析技术测试了K~+离子的浓度分布,证明所制出的样品是掩埋波导。     

浅谈天馈线电压驻波比对微波电路的影响

天馈线电压驻波比是微波电路运行的重要指标，通过典型事例来阐述天馈线电压驻波比的劣化对微波电路的影响，并根据多年实践经验提出天馈线维护需注意的事项。     

Efficient and accurate waveguide mode computation using BI‐RME and Lanczos methods

In this paper, a special purpose algorithm for solving large eigenvalue problems based on the Lanczos method is successfully applied to an engineering problem: the electromagnetic analysis and design of passive waveguide devices. For dealing with such complex problems, the boundary integral‐resonant mode expansion (BI‐RME) technique has been recently proposed. This technique solves integral equations (IEs) through the well‐known method of moments (MoM), thus leading to structured eigenvalue problems. These problems frequently become very large when solving complex arbitrary geometries with high accuracy. In such cases, the eigenvalue problem cannot be efficiently solved with standard methods by means of personal computers, essentially due to CPU time and memory allocation requirements. In this paper, we propose an alternative technique, based on the Lanczos method, for the fast and accurate solution of large BI‐RME generalized eigenvalue problems. The novel theoretical aspects of this approach, as well as the impacton the original BI‐RME formulation, are described. Comparative benchmarks are also successfully presented for the full‐wave analysis and design of real passive microwave devices. Copyright © 2005 John Wiley Sons, Ltd.     

PERIODIC DYADIC GREEN''S FUNCTION FOR FIELD ANALYSIS IN EMC CHAMBER

Herein a novel Dyadic Green's Function (DGF) is presented to calculate the field in ElectroMagnetic Compatibility (EMC) chamber. Due to the difficulty of simulating the whole chamber environment, the analysis combines the DGF formulation and the FEM method, with the latter deals with the reflection from absorbers. With DGF formulation for infinite periodic array structures, this paper investigates electromagnetic field in chamber with truncated arrays. The reflection from the absorber serves as the virtual source contributing to the total field. Hence the whole chamber field calculation can be separated from the work of absorber model set-up. Practically the field homogeneity test and Normal Site Attenuation (NSA) test are carried out to evaluate the chamber performance. Based on the method in this paper, the simulation results agree well with the test, and predict successfully the victim frequency points of the chamber.     

Periodic surface modeling for computer aided nano design

Current solid and surface modeling methods based on Euclidean geometry in traditional computer aided design are not efficient in constructing a large number of atoms and particles. In this paper, we propose a periodic surface model for computer aided nano design such that geometry of atoms and molecules can be constructed parametrically. At the molecular scale, periodicity of the model allows thousands of particles to be built efficiently. At the meso scale, inherent porosity of the model represents natural morphology of polymer and macromolecule. Surface and volume operations are defined to support crystal and molecular model creation with loci and foci periodic surfaces. The ultimate goal is to enable computer assisted material and system design at atomic, molecular, and meso scales.     

Simulation of macroscopic material behavior for uniaxial fiber-matrix composites, using a DAE-approach

The macroscopic deformation behavior of a fiber-reinforced aluminum-boron composite is investigated. Different periodic and random arrangements of the microstructure are considered with macroscopic hardening behavior due to the evolution of plastic zones on the microscale being taken into account.

For the solution of the initial boundary value problem, a non-standard algorithm is applied. It consists of the direct solution of the whole set of equations, treating all variables as global quantities. Together with a higher order time integration method (BDF2), an automatic step size control is used in the FEM calculations.     

无氰解吸工艺生产实践

结合生产实践讨论分析了影响载金炭解吸工艺指标的主要因素，介绍了无氰解吸工艺应用效果。     

Accurate and simple synthesis formulas for coplanar waveguides

Simple and accurate closed‐form formulas obtained by using a differential evolution algorithm are presented for the synthesis of coplanar waveguides (CPW). The results of the synthesis formulas proposed in this article are compared with those of the quasi‐static analysis, the synthesis formulas reported by the other researchers and also the experimental works available in the literature. The accuracy of the proposed synthesis formulas is found to be better than 0.75% for 9256 CPWs samples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.